Surveillance Gear Suggestions: Boosting the Speed of Your Wireless Cameras

Warning: Illegal string offset 'box_blank' in /home/bestlcdt/public_html/wp-content/plugins/seo-smart-links-business/seo-smart-links-business.php on line 634

Wireless surveillance equipment is considerably less difficult to install than its wired counterparts. All you need is a solid Wi-Fi connection to replace messy leads, drilled walls and hours (even days) of tough work. The issue with a wireless surveillance system, though, is that it is weak to network slowdowns that make it harder – occasionally even not possible – to get a bright real-time video feed of what is going on.

So without further ado, here are a few leading guidelines to support improve the speed and reliability of your wireless surveillance system:

1. Reduce the obstructions among the camera and the DVR One of the most obvious elements that hang up wireless surveillance equipment is physical obstructions. Your wireless surveillance equipment system should ideally have a clear line of sight to the wireless receivers. This may not be feasible for all networks though, particularly for ones with cameras spread out across diverse areas. Do note that supplies like plaster and wood do not block wireless signals as completely as bricks, concrete or metal. If you have an option among putting a wireless camera or a Wi-Fi router behind a concrete wall or a wooden wall, decide on the former to decrease the obstructing effect on wireless signals.

2. Match your video settings to match the available bandwidth. A wireless security cam can also slow down its video clip if the Wi-Fi connection does not have the bandwidth to handle the load in the first place. Basically put, you shouldn’t usually choose the top quality video settings just simply because your surveillance equipment can do so. High video capture resolutions, higher frame rates and a number of cams on a security system can put critical strains on the bandwidth capacities of a router. Over stressing the network could result in faulty video feeds that are distorted or even cut off. This is particularly accurate when your wireless surveillance equipment upload their captured information to the Internet. If a Wi-Fi router has sufficient problems dealing with many high-res video feeds on a regional connection, then you can bet that it’ll have even a lot more troubles dealing with a feed that it has to stream over the Internet.

3. Select a low-traffic wireless channel. Other wireless items like phones, tablets and smart TVs can conflict with the connections of your wireless surveillance system. This approach sounds technical at very first glance but there are thankfully programs out there that can simplify the approach for you.

At first you’ll have network analyzer software like inSSIDer. Download this system or an equivalent system and install it on your pc. Run the system and choose the alternative where it will scan 2.4 GHz channels. You should come up with a graph displaying you which channel has the highest signal strength, ergo the one that is least choked by other wireless items. Take note of this channel as you open up the control panel window of the router connected to your wireless surveillance network. Log in and choose the channel you noted earlier to complete the process.

Keep all these in mind and your wireless surveillance equipment will run smoother and come across fewer issues in the long term!

Tags: , ,